







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Pinewood, FL: What It Costs and What to Expect
A chain link fence in Pinewood typically runs $3,500 to $9,000 for a standard residential yard, and most installs take one to three days once materials are on site. That range covers galvanized or vinyl-coated chain link on steel posts set in concrete, with gates and tension hardware included. Call (833) 716-6251 for a free on-site estimate and we’ll measure your property line and give you a written, line-item number before any work starts.
How a Chain Link Fence Goes In, Stage by Stage

Chain link moves faster than any other fencing material, but the work still follows a fixed sequence. Here’s what actually happens from the first visit to the final walkthrough.
Stage 1: Site walk and layout (about an hour)
We walk the property line with you and flag the corners, gate locations, and any spot where a buried utility line or irrigation run sits in the path. In Pinewood’s 33167 ZIP, most lots have an existing fence footprint or old concrete footings, so we check what’s there before quoting. You decide where the gates land and how many you want. This is also when we confirm whether the project is part of a full Fence Installation in Pinewood plan that includes other fence types along the same line.
Stage 2: Utility locates and permit filing (2 to 5 business days)
We call in the free utility locate before anyone digs. For a fence under six feet on a single-family lot, Miami-Dade usually doesn’t require a building permit, but some Pinewood properties near corner lots or with easements need a right-of-way review. If a permit is required, we file it and wait for the clear. You don’t chase paperwork; we handle the submittal.
Stage 3: Demolition and prep (half a day)
Old fence, posts, and concrete footings come out. On the older block-and-stucco lots common here, that can mean chipping out set-in-concrete posts from a long-standing fence. We haul everything off and grade the line flat so the new posts sit true. You decide nothing at this stage; it’s cleanup.
Stage 4: Post setting and framing (day 1 to day 2)
Posts go in at eight-foot spacing, set in concrete, and cure overnight before the mesh goes up. Terminal posts at corners and gates get extra concrete and heavier gauge. We plumb and align every post so the top rail runs straight. This is the stage that decides whether the fence looks professional or sags in two years.
Stage 5: Mesh, gates, and walkthrough (day 2 to day 3)
We stretch the fabric, attach tension bands and the top rail, hang the gates, and set the latches so they close clean. Then we walk the finished line with you, check every gate swing, and hand over the workmanship terms. Most standard residential jobs finish inside three working days from the first dig.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Chain Link Fence Options You’ll Choose Between
Chain link isn’t one product. The specs you pick change both the price and how long the fence holds up in South Florida sun and hurricane-season wind. Here’s the honest trade-off on each.
- Galvanized steel (the standard): The lowest cost per foot. Bare galvanized mesh and posts resist rust well inland but show surface staining sooner near salt air and heavy humidity. Good fit for a rear property line you don’t look at every day.
- Vinyl-coated chain link: Color-bonded black or green coating over galvanized core. It costs more than bare galvanized but hides rust staining, looks cleaner against landscaping, and holds color through intense sun. The usual pick for front or side lines that face the street.
- Gauge of mesh and post: Heavier gauge fabric and thicker-wall posts cost more up front and last longer under wind load. Lighter gauge is cheaper and fine for a low-traffic boundary; heavy gauge is worth it on an exposed corner that takes gusts.
- Height: Four-foot is the common residential height and stays under most permit thresholds. Five and six-foot runs add material cost and may trigger permit and wind-load review.
- Gate hardware and privacy slats: Self-closing hinges, drop rods, and a keyed latch add cost. Privacy slats woven into the chain link cut visibility and add a wind surface you should account for during the install.
What a Chain Link Fence Costs in Pinewood, FL

Most Pinewood chain link jobs land between $3,500 and $9,000, with the typical residential yard toward the middle of that range. Here’s how the line items break down.
| Line item | Typical range |
|---|---|
| Standard chain link, rear and side lines | $3,500 – $6,500 |
| Larger or corner lot with more linear feet | $6,500 – $9,000 |
| Gate additions (walk or drive gates) | $300 – $900 each |
| Old fence and footing removal | $400 – $1,200 |
Four things push a job to the low versus high end: total linear footage, how much old fence and concrete has to come out, whether the site needs a permit or right-of-way review, and the spec you choose (bare galvanized is cheapest, vinyl-coated heavy gauge is highest). A sloped or heavily obstructed line adds labor too.
A written estimate from us lists posts, mesh, gates, hardware, concrete, removal, and disposal as separate lines, plus whether permit filing is included. It typically does not cover landscaping repair, sod replacement, or resetting irrigation lines cut during the dig; we flag those separately so there’s no surprise later. Our Fence Installation service covers the full line of fence types if you want to price chain link against another material before deciding.
See the difference
Before
After
Before
After
Before
AfterWhat Pinewood Homes Specifically Do to This Job
Pinewood’s 33167 ZIP sits in Miami-Dade’s inland northwest corridor, where the housing stock is mostly 1950s to 1970s single-family concrete-block and stucco homes on small, built-out lots. That build era shapes this job in ways a newer subdivision wouldn’t. Many properties already have an old fence line sunk in concrete footings that are decades set, so removal and resetting posts takes more time than a greenfield yard. Lots are tight, which means tighter spacing decisions and careful gate placement.
The other local factor is the Miami-Dade High-Velocity Hurricane Zone code. Fence work on its own rarely triggers the full NOA product-approval burden that roof and window work does, but a taller fence on an exposed corner can draw wind-load scrutiny, and any project tied to a structural or right-of-way review has to meet the code paperwork. Contractors from outside the county often miss this. Working block-wall tie-in points on older stucco homes also comes up when a fence meets a property wall. If a Pinewood homeowner is adding a garage or outbuilding, they often pair the fence with ADU Site Prep & Utilities in Pinewood, and any new gate or entry door nearby can be quoted alongside Door Installation in Pinewood at the same visit.
We cover Pinewood and the surrounding northwest Miami-Dade area, including Westview and West Little River, so scheduling a walkthrough here is straightforward.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Pinewood

Most residential chain link jobs finish in one to three working days once materials are on site, not counting permit or utility-locate wait time. Standard rear and side line installs of roughly 150 to 200 linear feet typically wrap in two days; larger corner lots or jobs with heavy old-fence removal can run to three. Call (833) 716-6251 for an exact timeline after we measure.
Most single-family fences under six feet in Pinewood don’t need a building permit, but corner lots, easements, and taller fences can require a right-of-way review. We check your specific lot during the walkthrough and file anything required on your behalf so the job isn’t held up at inspection. Call us for a free estimate and we’ll tell you up front whether your line needs a permit.
Yes, in almost every case, because a standard chain link line is set in independent concrete footings along the property line rather than tied to the house. The one thing we always do first is the utility locate, so we don’t hit a buried water, sewer, or irrigation line while digging post holes. If the locates flag something in the path, we shift the post spacing to clear it. Call (833) 716-6251 to schedule the site walk.
A standard residential chain link fence in Pinewood runs $3,500 to $9,000 depending on linear footage, spec, and removal of any old fence. Gates, taller runs, and permit review add to that. You get a written, line-item quote before work starts, with the price you see being the price you pay. Call for a free estimate on your exact property.
Every chain link fence we install is covered by our 730-Day Done Right Promise: if the workmanship isn’t right, we make it right. That backs the post setting, framing, and gate alignment. Call (833) 716-6251 and we’ll walk you through exactly what’s covered before you commit.
Get a Free Chain Link Fence Estimate in Pinewood
Call (833) 716-6251 to schedule a free on-site estimate for your chain link fence in Pinewood. We’ll measure the property line, check for utility conflicts, confirm whether your lot needs a permit, and hand you a written, line-item price with no surprises. Every job is backed by our 730-Day Done Right Promise and priced up front. Reach out today and we’ll get your walkthrough on the calendar.
Written by the team at Groundwork Construction Co.












