







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Sunny Isles Beach, FL: What the Job Actually Involves
Paver driveways in Sunny Isles Beach typically run $7,000 to $18,000 for a standard residential approach and take three to six working days from demo to final joint sand, assuming the base passes inspection on the first walk-through. The work means tearing out the old surface, rebuilding a compacted base, laying interlocking pavers on a proper edge restraint, and finishing with polymeric sand. Call (833) 716-6251 for a free on-site estimate, and we’ll measure the actual run and give you a written number.
How a Paver Driveway Goes In, Stage by Stage

The sequence matters more than the pavers themselves. A driveway that fails in five years almost always failed in the base, not the surface. Here’s how we run it.
Day 1: Demo and haul-off. We break out the existing concrete, asphalt or older pavers and truck the debris away. At the same time we check what’s underneath: soft spots, tree roots, old utility trenches that were never compacted. On the west-side single-family pocket off 182nd Drive and the Intracoastal blocks, we regularly find base failures left over from a previous pour. You’ll see the subgrade once it’s open, and that’s the moment to decide whether to address drainage while the ground is exposed.
Day 1 – 2: Excavation and base. We excavate to depth – typically 8 to 10 inches for a residential driveway so the base can carry a vehicle load. Then we build the base in lifts, compacting each layer and checking grade with a laser so water sheds toward the street or a drainage point instead of sitting against the garage slab. This is the slowest part of the job and the one nobody photographs. It’s also where the money goes.
Day 2 – 3: Inspection. Once the base is compacted and the edge restraint is set, the work gets inspected before a single paver goes down. You decide here whether you’re adding any drainage corrections or a catch basin at the low corner – it has to be settled before inspection.
Day 3 – 5: Laying pavers. We set a string line, lay the field from a fixed edge, and cut borders on site. You’ll pick the pattern and any border detail before we start, not mid-lay. A standard two-car run is usually one long day; a larger circular or double-run approach runs into a second.
Day 5 – 6: Edge restraint, sand, cleanup. Polymeric sand goes into the joints, gets watered in, and cures. We sweep, clean the site, and walk the finished job with you. You’ll get the care instructions in writing – no pressure washing for the first 30 days, no vehicle traffic until the sand sets.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
- Concrete vs. clay pavers. Concrete pavers are the workhorse for a Florida driveway – lower cost, wide color range, and they hold up to salt air and sun better than most people expect. Clay pavers resist fading almost permanently but cost more and can be brittle under heavy loads.
- Paver thickness. A 60mm paver is fine for foot traffic and light parking; 80mm is standard for a real driveway where a car sits every day. Don’t let anyone sell you 60mm for a vehicle run.
- Pattern. Running bond is the least expensive and fastest to lay. Herringbone is the most stable under turning wheels but costs more in labor and cutting waste. A basketweave reads clean on a wide approach.
- Brand and finish. Belgard and Unilock both carry palettes that suit the light stone-and-white look common on this island. Stock colors cost less; special order adds lead time.
- Edge and border. A contrasting border paver or a soldier course dresses the drive and locks the field. Beyond aesthetic appeal, it helps hold the edge against a turning tire.
What Paver Driveways Cost in Sunny Isles Beach, FL

For most homes here, a paver driveway lands between $7,000 and $18,000. Low end is a simple rectangular two-car run with stock concrete pavers and no surprises under the slab. High end is a large, curved drive with premium pavers, a border detail, and drainage work.
What pushes the number up or down:
- Square footage. At roughly $12 to $22 per square foot installed for standard pavers, size is the biggest lever. A 400-square-foot run and an 800-square-foot run are two different budgets.
- Existing surface and base condition. Removing a thick old pour costs more than pulling old pavers. If the base is soft or a trench was never compacted, excavation and re-compaction add hours and truck loads.
- Materials. Stock concrete pavers are the least expensive; clay or premium Belgard and Unilock lines with special-order color run higher.
- Pattern and cutting. Herringbone and complex curves generate more cutting waste and labor than running bond.
- Drainage. A new catch basin or re-grading to move water away from the garage is a real line item, not a hidden surprise. On a barrier island with a high water table, it’s often necessary.
Your written estimate includes demo, haul-off, base build, compaction, restraint, pavers, polymeric sand and cleanup. It does not include anything the inspection uncovers once the base is open – we tell you that before we start, so there are no change-order surprises mid-job. Permits, where required, are pulled by us and passed.
See the difference
Before
After
Before
After
Before
AfterWhat Sunny Isles Beach Homes Specifically Do to This Job
This is a narrow barrier island, and most of the housing stock is 1960s to 2000s high-rise condo and hotel construction along Collins Avenue, with a smaller pocket of mid-century single-family homes on the west side toward the Intracoastal. Almost every driveway job we do is on that smaller pocket – the beachfront towers turn to impact glass and balcony work, so a paver driveway is a very different job than the vertical renovation schedule the city normally runs on.
Two things shape the work. First, salt air and relentless UV fade older concrete pavers, so color selection matters more here than it would inland; a light stone palette reflects heat and holds its look in this sun. Second, the May-through-November rainy season compresses exterior schedules – a job that would run three days in March can stretch when afternoon storms move across the island. We build weather days into the estimate rather than pretend they won’t happen. Because so many homes here sit inside condo or HOA associations, the paver color and pattern usually need HOA sign-off, and we help you get the approval before the pallets are ordered. Within the 33160 ZIP, every job runs through the city’s permit and inspection process, and the base inspection happens before pavers go down.
If you own on the west side and this driveway work is part of a bigger exterior refresh, it’s worth reading our page on Driveway & Pavers in Sunny Isles Beach for the wider scope, or booking our Driveway & Pavers service through the main hub. Homeowners here often pair a new driveway with Door Installation in Sunny Isles Beach to finish a garage or entry, and some tie the job to a Cabinets & Countertops in Sunny Isles Beach project on the interior. We cover all of it through our Sunny Isles Beach service area.
Serving Sunny Isles Beach, FL – Our Local Coverage Area
We serve Sunny Isles Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Sunny Isles Beach

Most residential jobs run three to six working days, weather permitting. Demo and base take the first two, the inspection happens next, and laying plus sand and cleanup finish the rest. During the rainy season, add a weather day or two.
Yes in most cases – a driveway replacement with a new base typically requires a city permit and a base inspection before pavers go down. We pull the permit and pass the inspection as part of the job, and if your HOA needs the color and pattern approved first, we help with that too.
Sometimes. If the existing base is solid and only the surface is worn, overlaying or replacing pavers alone can work without full excavation. We open a test area and check the base before deciding – that’s the honest way to answer it.
Most fall between $7,000 and $18,000, driven by square footage, base condition, paver selection, pattern and any drainage corrections. Call (833) 716-6251 for an exact quote – estimates are free and in writing.
Every job is covered by our 730-Day Done Right Promise – if something isn’t right, we make it right. That’s backed in writing, and it’s one of the longest workmanship guarantees you’ll find on residential construction here.
Get a Free Paver Driveway Estimate in Sunny Isles Beach
Call (833) 716-6251 and we’ll schedule a free on-site measure and design consult. We look at the existing surface, check the base, talk through paver brand and pattern, and hand you a written, line-item estimate with no hidden extras and no pressure – prices are upfront, and 0% financing for 18 months is available. We take the guesswork out of the number so you can decide.
Written by the team at Groundwork Construction Co.












