







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Aventura, FL: What the Job Actually Involves
Paver driveways in Aventura, FL typically run $7,000 to $18,000 installed, with most completed in three to five working days once materials are on site. The work is a full tear-out and rebuild, not a resurfacing: existing surface removed, base compacted, edge restraints set, pavers laid, joints sanded, then a compaction pass. Call (833) 716-6251 for a free on-site estimate. We’ll measure the drive, confirm what’s under it, and hand you a written line-item quote before anything gets scheduled.
How a Paver Driveway Goes In, Day by Day

Most homeowners expect a vague “we’ll handle it” answer. You won’t get that here. Here’s the actual sequence, what gets decided at each stage, and how long it takes.
Stage 1: Site visit and written scope (45 to 60 minutes, before scheduling)
We measure the drive, note the slope away from the garage slab, and check what’s below: existing concrete thickness, buried sprinkler lines, gate posts, and where the downspouts discharge. You decide the paver style, color family, and whether the drive gets a border course. This visit is also where we flag anything that needs a permit review.
Stage 2: Demo and haul-off (day 1, one to two days)
Existing surface comes out and gets hauled away. In Aventura, that often means concrete, and the sub-base under it is inspected for soft spots, root intrusion, or old fill. Any soft ground gets excavated and replaced. If a gate or fence panel is in the way, it comes down and goes back at the end. This is the noisy stage, and it’s the one that gets scheduled around building and HOA rules.
Stage 3: Base prep and compaction (day 2, sometimes into day 3)
This is the stage that decides whether the driveway lasts. Base material goes in lifts and gets compacted in layers, not dumped and tamped once. Slope gets set so water leaves the drive and doesn’t pool at the garage door or the property line. Edge restraints are anchored along both sides before a single paver goes down. A paver drive is only as good as the base under it.
Stage 4: Setting pavers, cuts, and border (day 3 into day 4)
Field pavers get laid, then the cuts happen at the edges, around the gate, and wherever the drive meets a sidewalk or apron. A border course adds a day and real money, but on a curved or long drive it’s the detail that makes the finished driveway read as deliberate. You confirm the pattern and the border before the first paver goes down, because changing it after the fact means tearing the field out.
Stage 5: Joint sand, compaction, and final walkthrough (day 4 or 5)
Polymeric sand goes into the joints, the whole field gets a final compaction, and surface dust is cleaned off. Then we walk the drive with you: slope, drainage path, cuts, border alignment, and how the apron meets the street. Anything that needs correcting gets corrected before we call the job done, and it’s all covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Be Choosing Between
Paver driveways are not a single product. The choices below are the ones that actually change how the drive looks, feels, and holds up over the next decade.
- Concrete pavers vs. clay brick. Concrete pavers are the workhorse: $7,000 to $18,000 installed for a typical Aventura drive, dense, color-stable, and available in a wide range of finishes. Clay brick costs more and lasts a very long time, but the install skill required is higher and fewer crews do it well.
- Standard thickness vs. heavy-duty. Most residential drives use 60mm pavers. If the drive takes delivery trucks, an RV, or repeated contractor traffic, going to 80mm adds cost but reduces the chance of shifting and edge roll.
- Solid color vs. blended. Single-color pavers are the lowest cost per square foot and the easiest to match later. Blended, tumbled, or mottled styles hide tire marks and stains far better on a light-colored drive.
- Border course or not. A contrasting border, typically Belgard or Unilock, tightens the visual edge and adds a few hundred to a couple thousand dollars depending on drive length. Skip it on a narrow drive; it’s worth the money on a long curved one.
- Permeable vs. standard sand joints. Standard polymeric sand joints are the default. Permeable systems cost more up front but help on drives with poor drainage or where runoff rules apply to the property.
Hardscape isn’t the only thing that shifts in a coastal rebuild. If the drive work is part of a full Driveway & Pavers in Aventura project that also touches the front entry or a side path, we plan that scope together so the driveway and the surrounding hardscape read as one design rather than three separate jobs. Homeowners often pair this with Door Installation in Aventura when the garage door and its track are being replaced at the same time.
What Paver Driveways Cost in Aventura, FL

Paver driveway installation in Aventura runs $7,000 to $18,000. That range covers demo, base prep, compaction, pavers, edge restraints, joint sand, and cleanup. A short, straight drive on a clean base lands near the low end. A long, curved drive with a border course and difficult access lands near the high end.
The five variables that actually move the number:
- Square footage. The single biggest driver. Every extra 100 square feet adds material and labor in roughly equal measure.
- What’s being removed. Thin existing pavers come out fast. Thick poured concrete takes more equipment, more haul-off, and more time.
- Base condition. A stable base gets reused and topped. Soft or water-damaged ground means excavation, new fill, and possibly drainage work, which can add well over a thousand dollars.
- Paver grade and pattern. Standard concrete pavers sit at the bottom of the range. Heavy-duty, tumbled, or specialty finishes sit at the top.
- Access and staging. A drive that a delivery truck can reach directly is cheaper to build than one that requires moving material in by hand or through a narrow gate.
A written estimate from us lists each of those lines separately, and the number on the page is the number you pay. No change orders creeping in mid-job. If the job is over $10,000, our $1,000 off promotion applies, and 0% financing for 18 months is available if you want to spread the cost.
See the difference
Before
After
Before
After
Before
AfterWhat Aventura Homes Specifically Do to This Job
Aventura is built out. Almost nothing here is new construction on a fresh lot, so a paver driveway project almost always starts with tearing something out and working around a property that’s still in use. That changes the job in two specific ways.
First, access and approvals. Many Aventura drives serve gated communities or buildings with their own rules about working hours, material staging, and where dumpsters can sit. We plan demo and haul-off around those windows so the job doesn’t stall waiting for a management sign-off. Second, coastal conditions. Salt-laden air and year-round humidity here are hard on the edges of a driveway, especially where a paver meets a garage apron or a metal drainage grate. Corrosion starts at the fasteners and the base of any gate post or downspout bracket that touches the ground. We use coated or stainless hardware at those contact points and check them during the final walkthrough.
We cover the whole of Aventura as well as nearby Ives Estates, Ojus, North Miami Beach, and Sunny Isles Beach. It’s the kind of drive we know how to read: short, often curved, part of an entry sequence, and built for looks as much as function. If your project extends into the interior, our Cabinets & Countertops in Aventura work runs on the same dispatch and the same upfront pricing. See our Driveway & Pavers service for the full range of hardscape work we take on.
Serving Aventura, FL – Our Local Coverage Area
We serve Aventura and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Aventura

Most Aventura paver driveways take three to five working days from demo to final walkthrough. Small or straight drives finish closer to three; larger or bordered drives push to five, and weather plus material lead times can add a day. Call (833) 716-6251 and we’ll give you a target date range on the estimate.
In most Aventura cases, a straight replacement of a driveway surface in the same footprint doesn’t trigger a building permit, but widening the drive, changing the curb cut, or altering drainage often does. We check the scope against local requirements and pull what’s required. If a permit is needed, it’s built into the written estimate, not added later.
Yes. A paver driveway replaces the surface, not the structure around it. The garage slab, door, and framing stay put. What we do check is the transition at the apron and how the new surface height meets the garage threshold, so water runs out and not in.
Most jobs land between $7,000 and $18,000, with the exact figure driven by square footage, what’s being removed, base condition, and paver grade. Call (833) 716-6251 for a free on-site estimate and a written line-item quote, with no obligation.
Yes. Paver driveways we install are covered by the 730-Day Done Right Promise. If something isn’t right, we make it right. That covers workmanship and installation, and we’ll walk you through exactly what’s covered on your written estimate before you sign anything.
Get a Free Paver Driveway Estimate in Aventura
Call (833) 716-6251 to schedule your free on-site estimate. We’ll measure the drive, look at what’s under it, and go over paver options at a price range that fits your project. You’ll leave the visit with a written quote and a clear timeline. If the project runs over $10,000, the $1,000 off promotion applies, and 0% financing for 18 months is on the table. One drive, one crew, one number.
Written by the team at Groundwork Construction Co.












