







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in North Bay Village, FL: What They Cost and How Long They Take
A paver driveway in North Bay Village runs $7,000 to $18,000 installed, and most driveways here are finished in 3 to 5 working days once the base is compacted. The number swings on square footage, base depth, and whether the driveway sits over a seawall-adjacent slab or fresh fill. Call (833) 716-6251 and we’ll walk the property with you, measure it, and put the line items in writing before any pavers arrive on the island.
How We Build a Paver Driveway Here, Stage by Stage

Paver driveways fail at the base, not the surface. On an island surrounded by Biscayne Bay, that base is where we spend most of our time.
Day 1: Demo, Haul-Off, and Base Evaluation
We cut and remove the existing surface, then expose the subgrade. On Harbor Island and Treasure Island properties this is the day we find out what we actually have: old coral rock, sandy fill, or a 1960s slab that’s been patched four times. We also check where water wants to go, because a driveway that sheds toward a low-lying lot will hold standing water after a summer storm. A 400-square-foot tear-out takes most of a day. You’ll decide at this stage whether we haul everything off-island or reuse clean concrete as base.
Day 1 – 2: Grading, Base, and Compaction
We set the slope at roughly 2% away from the structure and build a compacted base, typically 6 to 8 inches of crushed aggregate with a geotextile layer underneath. That fabric matters more here than on the mainland: it keeps the fine island sand from pumping up into the base and shifting your pavers a year later. Compaction happens in lifts, with a plate compactor, and we check it before the sand setting bed goes down. This is the stage homeowners can’t see, and it’s the one that decides whether the driveway is flat in five years.
Day 2 – 4: Setting Bed and Paver Installation
A one-inch sand setting bed, then the pavers laid in your chosen pattern. A 20-by-30-foot driveway is roughly 600 square feet and takes two installers about a day and a half at a running bond, longer with a herringbone or a border course. You’ll pick the pattern and the color blend at the estimate, not on install day, because special-order pavers from Belgard or Unilock can take a week or two to reach the island.
Day 4: Cutting, Edge Restraint, and Joint Sand
We cut border pieces and around the apron, set a spiked edge restraint along the open sides, and sweep polymeric joint sand into the seams. The restraint is what keeps the field from spreading outward season after season, and it’s the piece most cut-rate paver jobs skip. Half a day, generally.
Day 5: Final Compaction and Walkthrough
We run a final compaction pass over the joint sand, clean the surface, and walk the driveway with you. Settlement touch-ups, if any, happen after the first rainy season. Every paver driveway we build is covered by our 730-Day Done Right Promise, so if something isn’t right, we come back and correct it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
The materials decision is mostly about how you want the driveway to look in ten years, and how much you’re willing to spend getting there.
- Concrete pavers, standard grade: the workhorse choice, roughly $7 to $12 per square foot installed. Straightforward color blends, good freeze-free performance, and easy to lift and reset if a utility ever needs access. Fits most buyers.
- Concrete pavers, premium or tumbled: Belgard and Unilock both make dimensional and tumbled lines with deeper color variation. Adds cost but reads less “parking lot,” which matters on a waterfront block.
- Clay brick pavers: the classic look and genuinely durable in salt air, but a smaller selection of sizes and a higher price per square foot. Suits a mid-century low-rise where the architecture calls for it.
- Permeable pavers: open-graded joints and a stone reservoir below. Useful where you’re managing stormwater on a tight lot, though the base excavation is deeper and the cost climbs.
- Pattern and border: running bond is the fastest and least expensive; herringbone and a contrasting border course add labor and waste, typically a few hundred dollars to a couple thousand on a normal driveway.
- Color and finish: integral color through the paver holds up better than a surface tint in salt air. Ask to see the blend against your house color, not on a screen.
What Paver Driveways Cost in North Bay Village, FL

Installed paver driveways in North Bay Village land between $7,000 and $18,000 for most residential jobs, and that range is real, not a teaser. Here’s what moves a job from the low end to the high end:
- Square footage: a single-car drive of about 300 square feet sits near the bottom; a two-car drive with an apron at 600 to 700 square feet pushes toward the top.
- Existing surface and haul-off: tearing out a thick 1960s slab and getting the debris off the island adds cost that a clean-gravel driveway doesn’t carry.
- Base conditions: sandy fill or a failing subgrade means deeper excavation, more aggregate, and geotextile. Coral rock is the opposite and can bring the number down.
- Material grade: standard concrete pavers versus a premium tumbled line or clay brick is a meaningful swing on a large field.
- Access and island logistics: tight streets on the causeway islands and delivery windows tied to the Kennedy Causeway drawbridge can add labor time, and we build that into the quote rather than surprising you mid-job.
A written estimate from us lists demo, haul-off, base materials, compaction, setting bed, paver quantity with a stated waste factor, edge restraint, joint sand, and cleanup. What it typically doesn’t include unless we scope it separately: driveway sealing (a later maintenance item), drainage tie-ins to the storm system, and any seawall or structural repair that turns up after demo. We don’t do change orders after the fact. The number you see is the number you pay, and the written quote is the document we both work from.
See the difference
Before
After
Before
After
Before
AfterWhat North Bay Village Homes Specifically Do to This Job
North Bay Village is a three-island municipality, Harbor Island, Treasure Island, and the North Bay Island causeway, and every one of those addresses is reached by the Kennedy Causeway. That single fact changes how a paver driveway gets built. Deliveries of palletized pavers and aggregate have to be scheduled around the drawbridge and around tidal flooding on the low-lying causeway approaches, so we plan pours, deliveries, and equipment moves for the morning rather than gambling on an afternoon window. Mainland crews routinely underestimate this and lose a day or two.
The housing stock is mostly mid-century and 1960s-70s waterfront buildings, many deep in 40-year recertification and facade or balcony restoration, alongside newer teardown-and-rebuild homes and townhomes. On the older properties we’re regularly pulling up driveways with cracked slabs and settled aprons, and the fix is almost always the base rather than the surface. Salt-laden air off the bay also corrodes fasteners and edge restraint faster than inland, which is why we spec hot-dipped galvanized spikes and coated restraints. Flood-zone (AE and VE) requirements push finished grades up on some lots, so we check that before we set slope. If your paver driveway is part of a full Driveway & Pavers in North Bay Village project alongside a walkway or patio, we’ll phase the work so the driveway stays usable as long as possible. Our Driveway & Pavers service covers the full scope, and we work across all of North Bay Village. Homeowners often pair this with Door Installation in North Bay Village or Cabinets & Countertops in North Bay Village when they’re renovating the front of the house at the same time.
Serving North Bay Village, FL – Our Local Coverage Area
We serve North Bay Village and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in North Bay Village

Most residential paver driveways in North Bay Village take 3 to 5 working days from demo to final walkthrough, weather and drawbridge logistics permitting. A small single-car drive can finish in 3; a 600-square-foot two-car drive with a border course usually runs the full 5. Special-order pavers can add a week or two to the front end while materials reach the island. Call (833) 716-6251 and we’ll give you a realistic start-to-finish window for your address.
Driveway work that changes the apron, alters grade, or touches the right-of-way generally requires a permit through the municipality, and flood-zone lots often trigger additional review. We pull the permits and schedule the inspections as part of the job. Call (833) 716-6251 and we’ll tell you what your specific property needs before you commit.
In most cases yes. A paver driveway is a surface and base job, so we’re not relocating plumbing or electrical unless something is buried too shallow in the base. If a utility line turns up where it shouldn’t during demo, we scope it separately and tell you before we proceed. Call (833) 716-6251 for a free on-site look.
Installed paver driveways here run $7,000 to $18,000 for typical residential sizes, with the final number set by square footage, existing surface, base conditions, material grade, and island access. We give a written line-item estimate with no change orders. Call (833) 716-6251 for an exact quote; estimates are free.
Every paver driveway we install is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right, for two full years after we hand it over. That covers our workmanship, and we stand behind the material warranties from our brand partners. Call (833) 716-6251 to schedule your free estimate and design consult.
Get a Free Paver Driveway Estimate in North Bay Village
We’ll come out to your North Bay Village property, measure the driveway, check the base and grade, and hand you a written, line-item estimate for paver driveways with no surprises in it. You’ll know the price before anyone orders a paver. Estimates and design consults are free, calls are answered by a live person around the clock, and we’re currently offering $1,000 off projects over $10,000 plus 0% financing for 18 months. Call (833) 716-6251 today.
Written by the team at Groundwork Construction Co.












