







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Aventura, FL
Custom and geometric windows are made to fit openings and shapes that stock sizes can’t cover: arched transoms, half-rounds over front doors, trapezoids under a sloped roofline, corner-wrapping glass in a condo, and radius windows that follow the curve of a bay. In Aventura, where high-rise towers on Biscayne Boulevard and low-rise homes in Aventura Lakes share a zip code, the demand for these shapes is steady and specific. We install them, we seal them against salt air and hurricane season, and we back the work with our 730-Day Done Right Promise. Call (833) 716-6251 and a live person answers, any hour.
Windows are the one part of a building where a small measuring mistake shows on every wall of the room. Geometric glass has no forgiveness in it. A half-round that’s a quarter-inch off on the radius won’t sit flush, and the gap becomes a wind-driven rain channel. Our technicians have up to 12 years of experience setting these openings, and we treat templating as the job, not the prelude to the job. You can see how this fits into our broader window work on the Windows & Doors page, or read on for the specifics of custom shapes.
Key Takeaways
- Geometric windows are built to a measured template, not ordered off a size chart. The opening is measured after demolition or framing is confirmed, then the unit is fabricated to match.
- Aventura’s wind-borne debris requirements mean glass and frame have to meet the Florida Product Approval system, and geometric units carry their own approvals separate from rectangles.
- Custom arches, trapezoids, and radii typically run 2 to 4 times the cost of a comparable stock rectangle, and lead time is the bigger factor than price.
- Our technicians have up to 12 years of experience, and every project carries the 730-Day Done Right Promise. Upfront pricing means the number on the estimate is the number you pay.

When You Need Custom & Geometric Windows
Most homeowners don’t wake up wanting a trapezoid window. They want light, or they want the elevation to look right, or they want a problem solved. Here are the situations we run into most in Aventura.
- Your front elevation has a shape nobody stocks. Arched gables and half-round transoms over entryways are common in Aventura’s older low-rise sections. When the original unit ages out, there’s no standard replacement, so the opening has to be templated and the glass fabricated to match.
- You’re adding a great room or a stair tower with a sloped ceiling. A raked roofline creates a triangular or trapezoidal wall above the plate line. Rectangular windows leave that wall solid and the room dark. Angled windows follow the pitch.
- An HOA or architectural committee flagged an off-spec window. If you replaced a unit without matching the approved shape, the committee will find it during the next walkthrough. We template the approved profile and match it, which is usually less expensive than fighting the board.
- You want corner glass in a condo. Corner-wrapping units and mitered glass corners are common in Aventura’s waterfront towers, where the view is the whole point of the unit. These need precise shop drawings because the corner joint is unforgiving.
- Salt air and sun have degraded the frames and seals. After a decade of ocean air, wood frames swell and paint lifts. If you love the shape and the shape is the reason the house looks the way it does, replacing the shape keeps the elevation and upgrades the performance.
If the problem is water getting in around a normal rectangle, that’s a different job, and the Aventura service area page covers the full range of window and door work we handle here.
Our Custom & Geometric Windows Process
Geometric units fail for one reason more than any other: someone ordered from a paper measurement and the wall wasn’t square. We don’t do that. Here is how the job actually runs.
- Site visit and opening assessment. We look at the existing opening, the wall assembly, the framing behind it, and the drainage plane. For high-rise units, this includes access, hoisting, and whether the glazing has to be brought up through the building or handed in through the unit. Nothing is priced before we’ve stood in the room.
- Template and shop drawings. Once the opening is exposed, we measure to a template or use a digital field measurement. The fabricator produces shop drawings for approval, and you sign off on radius, rise, mullion placement, and glass type before anything is cut. This is the step people skip and regret.
- Code and product approval check. Florida’s product approval system lists which assemblies are approved for which wind zone and impact requirement. Geometric units carry their own approvals. We confirm the unit you’re buying has a valid approval number and a design pressure rating that covers the opening’s location on the building.
- Fabrication. Lead time is the long pole. Custom shapes run 6 to 12 weeks depending on the material and how unusual the geometry is. We give you a real date, not a hopeful one, and we keep you posted.
- Installation and flashing. The unit goes in, the flashing is integrated with the wall’s drainage plane, and the sealant is done in a way that lets water leave the assembly rather than sit in it. On geometric windows, the top corners and the arch spring line are the vulnerable spots, and that’s where we spend the time.
- Final walkthrough and punch. We operate every unit, check the locks and screens, and sign off the punch list with you in the room. If the radius doesn’t sit right, it gets fixed. That’s what the 730-Day Done Right Promise means in practice: if it’s not done right, we make it right.
Every technician on the job is background-checked and in uniform. If you’ve had an unmarked crew show up at your door in Aventura and give you a number that doubled by the end of the day, that’s the problem we exist to solve.

Custom & Geometric Windows Pricing in Aventura
Custom geometric windows typically cost $1,200 to $4,500 per unit installed in the Aventura market, with arches and radius units at the top of that range and simple triangles or trapezoids closer to the bottom. The glass is only part of it. The template, the shop drawings, the product approval search, the hoisting or access plan, and the flashing all travel with the price. Here’s the line-item breakdown we use:
| Line item | Typical range | What drives it |
|---|---|---|
| Templating and shop drawings | $250 – $600 | Number of unique shapes, whether the opening has to be opened up to measure |
| Fabrication – trapezoid or triangle | $900 – $1,900 | Size, material, glazing package |
| Fabrication – arch, half-round, eyebrow | $1,400 – $3,200 | Radius, rise, whether it’s a true radius or a segment |
| Fabrication – corner or mitered glass | $2,200 – $5,000+ | Corner joint type, unit height, view-side finishes |
| Removal and disposal | $150 – $450 | Access, weight, material of the old unit |
| Installation and flashing | $400 – $1,200 | Wall assembly, height, hoisting needs |
| Impact glass upgrade | Add 20% – 45% | Wind zone, debris region, opening location |
What moves the number most in Aventura is not the shape. It’s the high-rise access. A half-round that takes four hours to set on a ground-floor home can take a full day on the 18th floor of a tower, with a plan for bringing the unit up and a schedule with building management. We price that honestly, and we tell you before you commit, not after. Upfront pricing, no surprises, is the rule.
On the material side, we work with a curated set of brand partners so you’re choosing quality rather than whatever the supplier has in stock. Andersen and Marvin handle the custom geometric line work, and on the fabrication and glazing side we lean on CertainTeed and GAF finishes where they apply. You’ll see those names in the quote because they’re specific, and specific is what you’re paying for. The home page lays out the full service menu if you want to see how windows sit alongside roofs, kitchens, and additions.
Most projects over $10,000 qualify for $1,000 off, and we offer 0% financing for 18 months so a multi-window geometric job doesn’t have to land all at once. Your first estimate and design consult are free.
FAQs – Custom & Geometric Windows
How much do custom geometric windows cost in Aventura?
Expect $1,200 to $4,500 per unit installed, with arches and radius units at the top and simple triangles toward the bottom. The high-rise access premium in Aventura can add a full day of labor on tower jobs. Call (833) 716-6251 for an exact quote; estimates are free.
How long does it take to get custom windows in Aventura?
Lead time is 6 to 12 weeks from approval of the shop drawings, and installation itself is usually one to two days per opening. The clock starts when you sign the drawings, not when you sign the contract, so the drawings are the first thing we produce. The longer end is for unusual radii and mitered corners.
Do custom geometric windows need to be impact-rated in Aventura?
Yes, in most cases. Aventura falls within a wind-borne debris region, and the unit has to carry a Florida Product Approval for the wind zone and design pressure at that opening. Geometric units are approved individually, so we verify the approval number before ordering. Don’t let anyone tell you the rules are different for custom shapes.
Is it cheaper to repair the old geometric window or replace it?
Repair is cheaper only when the frame and the shape are sound and the problem is glass or hardware. Once the frame has swelled, the radius has dropped out of true, or the seal has failed at the arch spring line, repair costs creep toward replacement and you still own a window that won’t hold up. We’ll tell you which one you’re looking at after we’ve seen it. Call (833) 716-6251 and we’ll schedule the look.
Can you match the shape of my existing window?
In most cases, yes. We template the opening after exposure and fabricate to that template, which is how we match older Aventura elevations where the original units are long out of production. The match covers radius, rise, mullion division, and glazing line, and we bring samples when the finish matters. A live person answers any hour if you want to talk it through.
What’s the difference between a true radius and a segment arch?
A true radius is struck from a single center point and gives you a clean semicircle. A segment arch is a shallower curve cut from a larger circle, and it’s what most people picture when they say arch. The two fabricate differently and price differently, and the choice affects how the unit sits against the wall above it.
What Sets Groundwork Construction Co. Apart in Aventura
We’ve been in business since 2014, and we’ve built the company around the idea that the homeowner should never be the last to know what’s happening on their own house. Calls are answered by a live person 24 hours a day, seven days a week. No voicemail. No Monday morning callback. Our technicians are background-checked and in uniform on every job. All projects are covered by the 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction.
From foundation to finish line, we handle the window shape, the wall around it, and the room it opens up. If the project grows past windows into a kitchen or an addition, you’re already dealing with a company that covers the trade. Built to last, backed in writing. If the geometry on your Aventura home needs to be right the first time, call (833) 716-6251 for a free estimate and design consult. A live person picks up.
Written by the team at Groundwork Construction Co. of Aventura, serving Aventura.


